PolyRolled Filter Cartridge RMF

RMF cartridges are constructed of a continuous polypropylene material. The graded pore size of the cartridge provides a high retention efficiency. The cartridges also have large filtration area and long life cycle as the result of their multiple-layer polypropylene membrane.

RMF-CRN series are constructed of double-layer polypropylene fiber. They have over two times higher retention efficiency and three times longer life cycle than similar polypropylene products.

RMF-PR series are constructed of single-layer superfine polypropylene fiber, the filtration efficiency is over 99.9%.

Features and Benefits

All-polypropylene structure, without any binder, less dissolved, raw materials meet NSF requirements
High dirt holding capacity, long life cycle
RMF-PR series have an absolute filtration efficiency

Typical Applications

Protection filtration for RO system
Pre-filtration for cooling water system

Flow Rate Characteristics

Materials of Construction

Filter Medium	Rolled Polypropylene Microfiber
Support Layer	Polypropylene
Core/Cage/End Caps	Polypropylene
O-Rings	Please refer to ordering information

Operating Conditions

Max. Operating Temperature	80°C
Max. Differential Pressure	4 bar / 21°C
	2.1 bar / 80 °C

Ordering Information

RMF-CRN-PR	Removal Ratings	End Cap	Nominal Length	Seal Material
	0030=0.3 μm	DOE = Double Open End	05= 5″	S=Slilicone
	0050=0.5 μm	TC = 222/Flat Cap	10=10″	E=EPDM
	0100=1.0 μm	TF = 222/Fin Cap	20=20″	V=Viton
	0300=3.0 μm	SF = 226/Fin Cap	30=30″	P=PFA/Viton
	0500=5.0 μm	SC = 226/Flat Cap	40=40″
	1000=10 μm	N = No Gaskets
	2500=25 μm	H = PE Gaskets
	5000=50 μm

Downloads

File	Description	File size	Downloads
Hall Pyke RMF		608 KB	795