Aquafil™

The Aquafil is a non integrity tested PES single layer membrane. This option allows you to purchase a low cost membrane to act as a pre filter to your final filter, ideal for applications where the particle size range is very low but high volume. A 0.45 Biofil can have a 0.45 Aquafil as a pre filter thus taking the load of the final integrity tested filter for half the price.

Single Layer Polyethersulphone Membrane Cartridge Filters

A range of cartridge filters from Porvair Filtration Group, featuring the latest developments in membrane technology, Aquafil™ cartridges are based on a naturally hydrophilic polyethersulphone membrane with a mirrored asymmetric pore structure. When combined with quality all-polypropylene cartridge components and high integrity manufacturing techniques common to all Porvair cartridge filters, the polyethersulphone membrane provides a high strength, long life cartridge.

Features and Benefits

Removal ratings
Aquafil™ cartridges are available in 0.2, 0.45, 0.65 and 1.2 micron.
Low protein binding
Aquafil™ cartridges have excellent low protein binding characteristics, typically 10 times lower than nylon, 2 times lower than polysulphone and similar to PVDF 0.2 filter.
Will not hydrolyse
Compared with other membranes such as nylon, the polyethersulphone membrane used in Aquafil™ cartridges is extremely resistant to hydrolysis. Capable of exposure in excess of 2 years, they are ideal for hot deionised water applications.
Excellent chemical compatibility
Suitable for steam sterilising
Full traceability
Controlled manufacturing environment

Materials of Manufacture

Filter media:	Polyethersulphone
Membrane support:	Polypropylene
Irrigation mesh (support):	Polypropylene
Drainage layer:	Polypropylene
Inner core:	Polypropylene
Outer support:	Polypropylene
End fittings:	Polypropylene
Support ring:	Stainless steel

Downloads

File	Description	File size	Downloads
Aquafil-Hall		284 KB	1047

Product Attributes

Gaskets and O-Rings

FDA approved Ethylene Propylene, PTFE encapsulated, Silicone or Nitrile.

Maximum Differential Pressure

Normal flow direction at:
20°C (68°F):	6.0 bar (87lb/in2)
80°C (176°F):	4.0 bar (58lb/in2)
100°C (212°F):	3.0 bar (43lb/in2)
120°C (248°F):	2.0 bar (29lb/in2)

Operating Temperature

Maximum continuous: 60°C (140°F)

Sterilisation

In situ steam 80 x 20 minute cycles at 125°C (257°F).
Hot water 100 x 20 minute cycles at 85-90°C (185-194°F).

Effective Filtration Area

Pore Size Rating	Effective Filtration Area (each 254mm (10″) module)
0.2, 0.45, 0.65 and 1.2μm	0.69m2 (7.4ft2)

Applications

Pure water supply
For use in de-mineralised and de-ionised water treatment systems for bioburden reduction in recirculating systems.
Biopharmaceuticals
Opthalmic solutions
Electronics and semiconductors
For the sub-micronic filtration of process water and chemicals, including solvents, developers and photoresists. Applications typically include central water plant treatment.
Fine chemicals
Beverages