APTF - Hall Pyke

APTF

Hall Pyke APTF-T Filter Cartridges are composed of an expanded hydrophobic PTFE membrane, ECTFE support and PVDF cage and core making it suitable to use in strong acid and solvent filtration. APTFI-T Filter Cartridges are composed of a hydrophilic PTFE membrane which is specially designed for aggressive water-based filtration conditions.

Features and Benefits

100% all Fluoropolymer construction
Absolute rated in all ratings except 0.22μm; 0.22μm rating’s retention efficiency is up to 99.99999%
High filtration performance including high flow rates and low pressure drops
Available in both hydrophobic and hydrophilic PTFE media

Quality Standards

Each filter is individually Integrity Tested prior to leaving the factory
Each filter is Fully Traceable with a unique serial number
Designed, developed and manufactured in compliance with ISO9001
Full Regulatory Compliance with the following:
- 21CFR.210.3(b)(5)(6), 211.72 for Non-Fiber Release
- Endotoxins: <0.25EU/ml/10inch filter
- USP <88> Plastic Class VI-121°C
- FDA 21 CFR177-182 & EU 1935/2004/EC

Typical Applications

Strong Acid Filtration
Aggressive Solvents Filtration

Materials of Construction

Filter Media	APTF-T/APTF: Expanded Hydrophobic PTFE Membrane
	APTFI-T/APTFI: Expanded Hydrophilic PTFE Membrane
Cage/Core/End Caps	PVDF
O-ring	PTFE/PTFE Encapsulated Viton

Operating Conditions

Max. Continuous Operating Temperature	96°C
Max. Differential Pressure	5.0 bar / 21°C (forward)
	3.0 bar / 80°C (forward)
Integrity Test Standards: APTF-T, 0.22μm	BP: ≥ 0.1MPa (60%/40%, IPA/Water)
	DF: ≤28ml/min/10”@80Kpa((60%/40%, IPA/Water
	WIT: 0.53ml/min/10”@0/25MPa
Integrity Test Standards: APTFI-T, 0.22μm	BP: ≥ 0.32MPa (Water)
	BP: ≥ 0.1MPa (60%/40%, IPA/Water)
	DF: ≤ 28ml/min/10”@80Kpa((60%/40%, IPA/Water)
Effective Filtration Area	0.96m2 / _ 68-10 inch

* Not Recommended for Inline Steam Sterilization and Autoclaving

Ordering Information

Removal Ratings	End Cap	Nominal Length	Seal Material
0022 = 0.22_m	SF=226 /Fin	05 = 5″	K=PTFE
0045 = 0.45_m	SC=226 /Flat	10 = 10″	P=PTFE
0300 = 3.0_m	DTF=D222 /Fin	20 = 20″	Encapsulated Viton
0500 = 5.0μm	DTC=D222 /Flat	30 = 30″
	DOE=Double Open End	40 = 40″

Downloads

File	Description	File size	Downloads
Hall Pyke APTF		1 MB	1033