| Features | Benefits |
|---|---|
| Genderless | Eases single-use systems specifications with one part number for both halves. |
| FLIP – ALIGN – PULL- SNAP | Intuitive four-step connection process reduces risk of operator error |
| Secure Side Latches | Increases connector robustness for wide variety of applications |
| Membrane Pull Tabs | Ensure simultaneous and secure removal of both membranes |
| No Secondary Component Needed | No need to purchase and store extra materials or tools to complete your sterile connection process |
| Largest AseptiQuik Flow Diameter (1.5″ Nominal Flow Path) | Move liquid medias faster to increase process efficiency |
Aseptiquik® W Series Connectors
Genderless AseptiQuik® W Series Connectors with nominal 1 ½” flow path enable quick and easy sterile connections, in large-volume, high-flow production and process intensification environments. The genderless design simplifies system integration and minimizes the risk of operator error. The connectors’ robust construction provides reliable performance without the need for clamps or fixtures. Biopharmaceutical manufacturers benefit from interchangeable 1”, 1 ¼”, and 1 ½” termination sizes for full- scale bioprocessing production environments with the quality and market availability they expect from the leader in the single-use connection technology.
Downloads
| File | Description | File size | Downloads |
|---|---|---|---|
CPC-AseptiQuik-W-Spec-Sheet
|
654 KB | 106 |
Product Attributes
Specifications & CV Value
Operating Conditions (Fluid Transfer)
| Pressure: | Up to 60 psi, 4.1 bar Up to 75 psi, 5.1 bar for 48 hours |
|---|---|
| Temperature: | 34°F to 104°F (1°C to 40°C) |
| Typical Flow Rate: | Cv Value Range: 39 to 118 |
| Termination Size: | 1″, 1 1/4″, 1 1/2″ hose barb, 1 1/2″ Sanitary (25.4mm, 31.75 mm, 38.1 mm, 38.1 mm) |
Materials:
| Connector: | Polycarbonate (white) |
|---|---|
| Shipping Clip: | Polycarbonate (clear) |
| Pull Tabs/Caps: | Polycarbonate (white, HT version) |
| Pull Tab Guide: | Polyphenylsulfone (gray) |
| Side Latch: | Polyphenylsulfone (blue) |
| Seals: | Silicone (clear), platinum-cured |
| Membrane: | Hydrophobic Polyethersulfone (HT version), PTFE strip sticker |
Sterilization:
| Gamma: | Up to 50 kGy irradiation |
|---|---|
| Autoclave High Temp (HT) Version: | Up to 266°F (130°C) for 60 minutes |
