Fluorofil™ F100

Description

Guaranteed microbial ratings in a liquid challenge
Fluorofil™ F100 cartridges are validated for particle removal in liquids by using the industry standard modified OSU F-2 single pass challenge test. The retention rating is correlated to the bubble point. Each module is individually tested to ensure it reaches the required bubble point value.
Flow ΔP characteristics
The unique characteristics of the PTFE membrane, combined with the construction of the Fluorofil™ F100 filter cartridge, results in exceptionally high liquid flow rates at low pressure differentials.
Cartridge integrity and low TOC levels
All Fluorofil™ F100 cartridges are integrity tested and supplied clean, having been flushed with pure water. When required they can be pulse flushed with 18MΩ.cm pyrogen-free ultra-clean water.
Solvents and aggressive chemicals
The exceptional chemical resistance of PTFE allows Fluorofil™ F100 filter cartridges to be compatible with aggressive chemical solutions, including strong acids, alkalis, solvents and etchants.

PTFE encapsulated, Viton, Ethylene Propylene, Nitrile or Silicone.

Maximum continuous: 80°C (176°F).

Absolute Microbial Rating	Effective Filtration Area (each 254mm (10″) module)
1.0μm (β5000, 99.98%)	0.68m2 (7.3ft2)

Carbon fines removal
For the removal of carbon fines typically used in Pharmaceutical intermediates.
Fine chemicals and solvents
The removal of particles from processing chemicals and solvents, such as MEK, Ethyl Acetate, Pyridine, Tetrahydrofuran (THF).
Photoresists and developers
The microfiltration of photoresists and developer solvents, susceptible to contamination and precipitation during manufacture, storage and processing.

File name: Fluorofil_F100-Hall.pdf
File size: 204.8KB