GlassGas

GlassGas Filter Cartridges

Glass Fiber · Pre-filter for Gas

GlassGas Filter Cartridges are composed of super-fine glass microfiber with a dirt holding capacity over 90%. They are highly recommended for the pre-filtration of foul gases as an effective protection for the final sterilizing-grade filters to increase their service life.

Features and Benefits

High porosity and flow rates
High absorption and retention efficiency
Low pressure drops

Quality Standards

Designed, developed and manufactured in compliance with ISO9001
Full Regulatory Compliance with the following:
- 21CFR.210.3(b)(5)(6), 211.72 for Non-Fiber Release
- Endotoxins: <0.25EU/ml/10inch filter
- USP <88> Plastic Class VI-121°C
- FDA 21 CFR177-182 & EU 1935/2004/EC

Typical Applications

Antibiotic Fermented Air
Compressed Air
Bio-engineered Fermented Air

Flow Rate Characteristics

Materials of Construction

Filter Media	Super-fine Glass Microfiber
Support	Polypropylene
Core/Cage/End Caps	Polypropylene

Operating Conditions

Max. Temperature	80°C
Max. Differential Pressure	4.0 bar / 21°C
	2.4 bar / 80 °C
Effective Filtration Area	0.35 mÇ / ϕ 69-10inch

Sterilization

Inline Steam Sterilization

up to 30 cycles (135°C for 30min@30kPa per cycle)

Ordering Information

Removal Ratings	End Cap	Nominal Length	Seal Material
0001=0.01 μm	HSF=226 /Fin (PBT Insert)	05=5″	S=Silicone
0030=0.3 μm	HSC=226 /Flat (PBT Insert)	10=10″	E=EPDM
0050=0.5 μm	HTF=222 /Fin (PBT Insert)	20=20″	V=Viton
	HTC=222 /Flat (PBT Insert)	30=30″
	DOE=Double Open End	40=40″

Downloads

File	Description	File size	Downloads
Hall Pyke GlassGas		1 MB	843