Construction Materials
| Housing: |
Polypropylene |
| Filtration Media: |
Membranes
Polyethersulfone
Nylon
Polypropylene
PTFE
Depth Pleated
Polypropylene
Fiberglass |
All materials of construction are FDA accepted. Final assemblies have been validated to pass USP class 6 Toxicology extractable tests, oxidizable substances for plastics, endotoxin level and other quality
Sanitization / Sterilization
| Filtered Hot Water: |
1940F (90°C) |
| Autoclave: |
2600F (127°C), 30 min, multiple cycles |
Chemical Sanitization
Industry standard concentrations of hydrogen peroxide, paracetic acid, sodium hypochlorite and other selected chemicals. Sanitization protocols designed to extend the useful life of CP capsules are available from Critical Process Filtration, Inc.®.
Pre Sterilized
CP capsules are offered in both a non and pre sterilized grade.
| Filtration Media Support: |
Polypropylene |
| Support Components: |
Polypropylene |
| Sealing Method: |
Heat – Fused |
Product Attributes
Inlet & Outlet Options
- 1/4” Female NPT
- 1/4” Male NPT
- 3/8” Female NPT
- 1/2” Female NPT
- 1/2” Male NPT
- Sanitary
- Hose Barb.
Vent & Drain
Standard with LuerLok® ports and caps.
Maximum Operating Parameters
| Liquid Operational Pressure: |
80 psi (5.5 bar) at 20°C. |
| Gases Operational Pressure: |
60 psi (4.1 bar) at 20°C. |
| Forward Differential Pressure: |
50 psi (3.4 bar) at 20°C. |
| Reverse Differential Pressure: |
40 psi (2.7 bar) at 20°C. |
| Operating Temperature: |
110°F (43°C) at ≤ 30 psi (1.4 bar) in water. |
| Recommended Change Out Pressure: |
20 psid (2.4 bar) |
Pore Size
Removal Ratings: 0.03 to 100 microns
Dimensions
| Nominal Length: (length based on capsules with hose barb connections) |
| Capsule |
2” |
5” |
10” |
20” |
30” |
| Inches |
5” |
8 5/8” |
13 3/8” |
22 7/8” |
32 7/16” |
| cm |
12.7 |
22.0 |
33.9 |
58.2 |
82.4 |
| Surface Area |
| Feet |
1.0ft2 |
3.0ft2 |
6.8ft2 |
on request |
on request |
| cm |
930cm2 |
2788cm2 |
6318cm2 |
on request |
on request |
Outside Diameter: 3.50 inches (8.9 cm) nominal.
