HT TefloGas Filter Cartridges

Hydrophobic PTFE Membrane · Sterile-Grade Filter for Critical Gas Filtration

HT TefloGas Filter Cartridges are composed of a PTFE membrane with advanced high-temperature-resistant core and internal adaptor. They are specially designed for air, gas, and vent sterile filtration at critically high temperatures.

Features and Benefits of HT TefloGas Filter Cartridges

Designed for Water Intrusion Test (requires no alcohol)

Oxidation-resistant materials provides longer service life in high temperature air and vent applications

Exceptionally high flow rates with low pressure drops

Part/Serial numbers are laser-etched and have 2D matrix code for easy tracking

Filter construction provides steam resistance at high temperatures

Quality Standards

Integrity Test correlates to ASTM F838-05 Bacterial Challenge Test (BCT)

Each filter is individually Integrity Tested prior to leaving the factory

Each filter is Fully Traceable with a unique serial number

Designed, developed and manufactured in compliance with ISO9001

Full Regulatory Compliance with the following:

21CFR.210.3(b)(5)(6), 211.72 for Non-Fiber Release
Endotoxins: <0.25EU/ml/10inch filter
USP <88> Plastic Class VI-121°C
FDA 21 CFR177-182 & EU 1935/2004/EC

Typical Applications of HT TefloGas Filter Cartridges

Autoclaves

Fermented Inlet Air

Aseptic Packaging/Blow-fill Seal (BFS)

Hot Water for Injection (WFI) Tank Vents

Oxygen-rich Fermented Air

Description

Flow Rate Characteristics – HT TefloGas Filter Cartridges

Materials of Construction – Hall Pyke HT TefloGas Filter Cartridges

Filter Media	Hydrophobic PTFE Membrane
Support/Drainage Layers	Polyphenylenesulphide (PPS)
Core/Cage/Endcaps	Polypropylene

Operating Conditions

Max. Temperature	100°C
Max. Differential Pressure	5.4bar/50°C(forward)
	4.1bar/80°C(forward)
Effective Filtration Area	0.68m² / Ω 68-10 inch

Sterilisation

In-line Steam Sterilization	up to 100 forward cycles (145°C for 30min at 30kPa for every cycle)
Autoclave	up to 400 cycles (130°C for 30min per cycle)

Integrity Test Data

Bubble Point	BP : ≥0.11Mpa (60%/40%IPA/Water), 0.01μm
Diffusion Flow	DF : ≤16ml/min/10”cartridge@80KPa(60%/40%IPA/Water), 0.01μm
Water Intrusion Test	WFT : ≤0.53ml/min/10”cartridge@0.25MPa,0.01μm

Ordering Information

Removal Ratings	End Cap	Nominal Length	Seal Material
0001=0.01 _m	HSF=226 /Fin (PBT Insert)	10=10″	S=Silicone
0022=0.22 _m	HSC=226 /Flat (PBT Insert)	20=20″	E=EPDM
	HTF=222 /Fin (PBT Insert)	30=30″	V=Viton
	HTC=222 /Flat (PBT Insert)	40=40″	P=FEP Encapsulated Viton
	DOE=Double Open End		K=PTFE

HT