Features
- Filter medium and endcaps made of stainless steel
- Retention rate of 1 μm, 5 μm and 25 μm (98% efficiency for steam and 100 % efficiency for gases)
- Sintered stainless steel filter medium with a porosity level of more than 50 %
- Regenerable with ultrasonic bath
- Stainless steel sintering technology
- Available in 13 sizes
- Components made of stainless steel
Benefits
- Good durability against most liquids, gases and aggressive steams
- Exactly defined particle retention rate at given pore size
- High dirt holding capacity, good flow rate at low differential pressure
- Filtration costs reduced to a minimum, in particular for hight dirt load
- No use of additives or other chemical binders needed
- Optimum filter size for individual application
- Temperature range from -20 oC up to 210 oC
Materials of Manufacture
| Filter media: | Sintered SS 1.4404 |
| Endcaps | SS 1.4301 |
| Bonding material | Plastic Steel* |
| O-Rings | EPM** |
| * > 150oC welded endcaps ** Silicone, Buna N, Viton, Aflas or Kalrez on request |
|
