SteriPS - Hall Pyke

SteriPS

SteriPS Filter Cartridges

PES Membrane · Sterile Liquid Filter

SteriPS Filter Cartridges are specially designed to provide a reliable sterilizing solution at an economical cost. Hydrophilic PES membrane cartridges require no pre-wetting and are ready to use. In addition, these filters provide excellent performance in pharmaceutical applications.

Features and Benefits

Low diffusion flow
Inherently hydrophilic PES membrane
High surface area provides excellent flow rates and extended service life while maintaining high bacteria removal efficiency
Low protein binding

Quality Standards

Integrity Test correlates to ASTM F838-05 Bacterial Challenge Test (BCT)
Each filter is individually Integrity Tested prior to leaving the factory
Each filter is Fully Traceable with a unique serial number
Designed, developed and manufactured in compliance with ISO9001
Full Regulatory Compliance with the following:
- 21CFR.210.3(b)(5)(6), 211.72 for Non-Fiber Release
- Endotoxins: <0.25EU/ml/10inch filter
- USP <88> Plastic Class VI-121°C
- FDA 21 CFR177-182 & EU 1935/2004/EC

Typical Applications

Antibiotics
LVP & SVP
Large Batch Solutions
Cleaning & Disinfecting Liquids

Flow Rate Characteristics

Materials of Construction

Filter Media	PES Membrane
Cage/Support	Polypropylene
Core/End Caps	Polypropylene

Operating Conditions

Maximum Temperature	90°C
Max.Differential Pressure	4.0bar / 21°C (forward)
	2.4bar / 90°C (forward)
Effective Filtration Area	0.58m²/ μ 68-10 inch

Sterilization

Inline Steam Sterilization	up to 30 cycles (135°C for 30min@30kPa per cycle)
Autoclave	up to 30 cycles (130°C for 30min per cycle)

Integrity Test Data

Bubble Point	BP : ≥ 0.32 MPa (water), 0.22 μm
	BP : ≥ 0.20 MPa(water), 0.45 μm
Diffusion Flow	DF : ≤ 25 ml/min/10”@ 0.275 Mpa, 0.22 μm
	DF : ≤ 25 ml/min/10”@ 0.15 Mpa, 0.45 μm

Ordering Information

Removal Ratings	End Cap	Nominal Length	Seal Material
0010=0.1μm	HSF=226 /Fin (PBT Insert)	05=5″	S =Silicone
0022=0.22μm	HSC=226 /Flat (PBT Insert)	10=10″	E =EPDM
0045=0.45μm	HTF=222 /Fin (PBT Insert)	20=20”	V =Viton
	HTC=222 /Flat (PBT Insert)	30=30”
	DOE=Double Open End	40=40”

Downloads

File	Description	File size	Downloads
Hall Pyke SteriPS		1 MB	842