Description
Materials of Manufacture
| Filter media: | Glass fibre |
| Prefiltration layer: | Polypropylene |
| Support layers: | Polypropylene |
| Inner core: | Polypropylene |
| Outer support: | Polypropylene |
| End fittings: | Polypropylene |
| Support ring: | Stainless steel |
Gaskets and O-Rings
Ethylene Propylene, PTFE encapsulated, Silicone, Viton, Nitrile or Polypropylene felt.
Maximum Differential Pressure
| Normal flow direction at: | |
| 20°C (68°F): | 6.0 bar (87lb/in2) |
| 80°C (176°F): | 4.0 bar (58lb/in2) |
| 100°C (212°F): | 3.0 bar (43lb/in2) |
| 120°C (248°F): | 2.0 bar (29lb/in2) |
Operating Temperature
Maximum continuous: 60°C (140°F)
Integrity Testing
Microfil™ GP filter cartridges are batch tested for integrity using the Bubble Point Test. Procedural details are available from Porvair.
Applications
- Foods and Beverages
- Process Water Systems
The filtration of process water installations for removal of general contamination and resin fines. The naturally occurring zeta-potential of glass fibre in aqueous solutions makes the MicrofilTM GP filter ideal for removing submicronic particles. - Pharmaceuticals and Bioprocessing
The excellent dirt holding capacity of the Microfil™ GP makes it an ideal choice for prefiltration of complex biological fluids (e.g. cell culture media). - Fine Chemicals
The filtration of high grade chemicals including solvents, reagents, photographic emulsions, inks and paints. - Cosmetics
Effective Filtration Area
| Absolute Removal Rating | Effective Filtration Area (each 254mm (10″) module) |
| 0.5, 0.8, 1.0, 2.0 and 5.0μm | 0.4m2 (4.4ft2) |
Clean Water Flow Rates
- Typical clean water flow rate:
A 254mm (10”) Microfil™ GP single cartridge exhibits the flow-ΔP characteristics indicated below, for solutions with a viscosity of 1 centipoise.
